Biomechanical analysis of total arch maxillary distalization using infrazygomatic crest miniscrews: a finite element analysis study.

AIM: To evaluate the maxillary incisors and canine's immediate movement tendency using three different power arms (PA) height levels during total arch maxillary distalization supported on infrazygomatic crest (IZC) miniscrews according to finite element analysis (FEA). METHODS: Three finite element models of the maxilla were developed based on CBCT imaging of a teenage male patient presenting a Class II Division 1 malocclusion in the early permanent dentition. Maxillary complex, periodontium, orthodontic accessories, IZC miniscrews and an orthodontic wire were digitally created. The PAs were placed between canines and lateral incisors and projected at 4, 7, and 10 mm height distances. After that, distalization forces were simulated between PA and IZC miniscrews. RESULTS: The anterior teeth deformation produced in the FEA models was assessed according to a Von Mises equivalent. The stress was measured, revealing tendencies of initial maxillary teeth movement. No differences were found between the right and left sides. However, there was a significant difference among models in the under-stress areas, especially the apical and cervical root areas of the maxillary anterior teeth. More significant extrusion and lingual tipping of incisors were observed with the 4 mm power arm compared to the 7 mm and 10 mm ones. The 10 mm power arm did not show any tendency for extrusion of maxillary central incisors but a tendency for buccal tipping and intrusion of lateral incisors. CONCLUSION: The maxillary incisors and canines have different immediate movement tendencies according to the height of the anterior point of the en-masse distalization force application. Based on the PA height increase, a change from lingual to buccal tipping and less extrusion tendency was observed for the incisors, while the lingual tipping and extrusion trend for canines increased.

Anterior Open-Bite Treatment with Lingual Spurs and Chincup: a Prospective, Randomized Digital Model Study / Tratamento da Mordida Aberta Anterior com Esporão Lingual e Mentoneira: Estudo Prospectivo Randomizado em Modelos de Estudo Digitais

Esse estudo propectivo teve como objetivo realizar a avaliação das alterações dentoalveolares em modelos digitais de pacientes cuja mordida aberta anterior foi tratada seguindo dois protocolos distintos: esporão lingual e mentoneira. A amostra foi composta por 41 pacientes (27 do sexo feminino e 14 do sexo masculino) com idades entre 7-10 anos (média de idade de 8.37 anos), dentição mista com diagnóstico de mordida aberta anterior (média de -3.43mm) e tratados ao longo de um ano. Os pacientes foram aleatoriamente dividiso em dois grupos de acordo com a terapia realizada: Grupo 1 (n=23) tratados com esporão lingual, e Grupo 2 (n=18) tratados com mentoneira pré-fabricada. Os modelos de gesso foram escaneados, gerando uma imagem tridimensionao em qual as medidas foram realizadas em 2 tempos distintos: T1 (imediatamente antes do tratamento) e T2 (um ano após o início do tratamento). Alteraçnoes transversais, comprimento e perímetro dos arcos dentários superior e inferior, trespasse horizontal e vertical, assim como inclinação dos incisivos centrais foram avaliadas. O Coeficiente de Correlação Interclasse (CCI) e o método Bland-Altman foram aplicados para verificar o erro intra examinador. Os resultados foram analisados através do Teste T pareado e independente adotando uma significância de 5%. Após um ano de tratamento, observou-se alerações estatisticamente significantes em todas as variáveis, exceto perímetro e comprimento dos arcos superio e inferior, inclinação do incisivo central superior e trespasse horizontal. As alterações enre os grupos (T2-T1) apresentaram resultados similares. Concluiu-se que ambos os protocolos apresentaram mudanças semelhantes na mordiada aberta anterior após um ano de tratamento.(AU)

Immediate skeletal effects of rapid maxillary expansion at midpalatal suture opening with Differential, Hyrax and Haas expanders.

OBJECTIVE: The aim of this study was to test the null hypothesis that there is no difference at the midpalatal suture opening after rapid maxillary expansion (RME) using Expander with Differential Opening (EDO), Hyrax-type and Haas-type expanders. METHODS: Occlusal radiographs of 52 patients (19 males and 33 females; average age= 9.46?1.20 years) treated with RME were divided into three groups, according to the expander used: EDO (n=17), Hyrax-type (n=21) and Haas-type (n=14). The evaluated variables were: A) Distance between the maxillary central incisors at the incisal edge; B) Distance between the alveolar ridges at the midpalatal suture; C) Suture opening at 10-mm distance from the crest to posterior, at the midpalatal suture; D) Suture opening at 20-mm distance from the crest to posterior, at the midpalatal suture; and E) Suture opening at 30-mm distance from the crest to posterior, at the midpalatal suture. To assess the normality of variables, the Shapiro-Wilk test was performed. For intergroup comparison, ANOVA with a significance level of 5% was used. RESULTS: At the region A, Hyrax-type (4.66 mm) and EDO (4.87 mm) groups presented larger openings than the Haas-type group (3.43 mm). In regions B and C, EDO showed a statistically significant greater opening than the Haas-type group. In region D, a smaller opening of the midpalatal suture was observed in the Haas-type group, compared to the Hyrax-type and EDO groups. CONCLUSIONS: EDO and Hyrax-type produced greater immediate skeletal effects, compared with Haas-type, but these differences were about 1 mm and might not be clinically significant.

Influence of anxiety and catastrophizing on pain perception in orthodontic treatment and its association with inflammatory cytokines.

Pain is common in orthodontic treatment, is subject to individual variation, and is associated with anxiety and stress, which can potentially become catastrophizing. The aim of the present study was to determine the variability of pain response after the insertion of orthodontic separators and to assess the association of pain levels with dental anxiety, catastrophizing, tooth sensitivity, and genetic expression of cytokines. To this end, 70 patients of both genders were divided into two equal groups according to the elastomeric separator used: G1 (Dentaurum) and G2 (Orthometric). Two separators were inserted in the mesial and distal sides of the lower right first molar. Participants were instructed to rate the level of pain at T0 (before insertion), T1 (just after insertion), and T2 (24 hours after insertion) on a visual analog scale. The gingival crevicular fluid was collected at T0 and T2. The levels of anxiety, catastrophizing, tooth sensitivity, and cytokine expression were also assessed. Statistical analysis was performed with the Fisher-Freeman-Halton, chi-squared, Spearman's correlation, and dependent and independent t tests (α=5%). Pain intensity was higher at T2 than at T1, in both groups (P<.05). An association was established (P<.05) between pain intensity at T1 and catastrophizing, and at T2 with anxiety and catastrophizing. Within-group differences in cytokine expression were found between T0 and T2. There was no correlation between cytokine expression and pain levels, anxiety, catastrophizing, and sensitivity at T2. Tooth separation produced variable pain levels, which were influenced by anxiety and catastrophizing, however, pain level was not correlated with increased cytokine expression.

Dental arch changes comparison between Expander with Differential Opening, Hyrax-type and Haas-type expanders: A prospective clinical study.

OBJECTIVE: Compare changes in arch form after RME achieved by Expander with Differential Opening (EDO), Hyrax-type and Haas-type expanders. MATERIALS AND METHODS: Dental models were obtained from 61 patients aged 7-11 years before expansion (T1) and 6 months after the active phase when the appliances were removed (T2). The groups were formed according to the expander used: EDO (n = 18, mean age: 9.46 ± 0.82 years), Hyrax-type (n = 22, mean age: 9.62 ± 1.57 years) and Haas-type (n = 21, mean age: 9.29 ± 1.05 years). The expander`s activation protocol consisted of 7 mm, except for EDO`s anterior screw, which was 9 mm. The measurements of upper and lower intercanine distance, inter-first permanent molar, arch perimeter and length, maxillary canine and first-permanent molar inclination, and palatal depth were performed using the OrthoAnalyzer 3D software. Intergroup comparisons of T1 and between changes (T2-T1) were performed using ANOVA followed by Tukey. RESULTS: In the upper intercanine distance EDO provided a greater increase than Haas-type. In the distance between upper fist permanent molars EDO showed higher values than Haas-type and Hyrax-type. In the lower intercanine distance and maxillary arch length, Haas-type promoted higher increase than EDO. CONCLUSIONS: The EDO promoted greater transverse changes in anterior region than Haas-type and greater transverse changes in posterior region of the maxilla than both conventional expanders. The appliance used for RME influences dental arch changes after treatment; therefore, it is recommended to individualize the choice of expander depending on the clinical necessity of each case.

Total arch maxillary distalization using infrazygomatic crest miniscrews in the treatment of Class II malocclusion: a prospective study.

OBJECTIVES: To evaluate treatment effects in Class II patients using infrazygomatic crest (IZC) miniscrews (MS). MATERIALS AND METHODS: A prospective sample of 25 adolescents (14 females and 11 males; mean age: 13.6 ± 1.5 years) who underwent maxillary dentition distalization treatment with IZC MSs were recruited. Lateral cephalograms and digital models at the beginning of treatment (T1) and after Class II molar correction (T2) were obtained. To compare cephalometric and digital model changes, paired t-test and Wilcoxon test were used. A significance level of 5% was used. RESULTS: All patients achieved Class II molar correction over a mean period of 7.7 ± 2.5 months. The IZC MS therapy provided 4 mm of distalization; there was 1.2 mm of intrusion of the first molar with 11.2° distal tipping. The maxillary incisors were retracted 4.7 mm and tipped lingually 13.4°. Overjet and overbite showed a reduction of 3.6 mm and 2.4 mm, respectively. The occlusal plane rotated clockwise 2.8°. The upper lip was retracted by 1 mm and the nasolabial angle increased 5.1°. There was an increase in the interpremolar and intermolar distances. CONCLUSIONS: Total arch distalization of the maxillary dentition using IZC MS was effective in the treatment of Class II malocclusions.

Influence of anxiety and catastrophizing on pain perception in orthodontic treatment and its association with inflammatory cytokines

Abstract Pain is common in orthodontic treatment, is subject to individual variation, and is associated with anxiety and stress, which can potentially become catastrophizing. The aim of the present study was to determine the variability of pain response after the insertion of orthodontic separators and to assess the association of pain levels with dental anxiety, catastrophizing, tooth sensitivity, and genetic expression of cytokines. To this end, 70 patients of both genders were divided into two equal groups according to the elastomeric separator used: G1 (Dentaurum) and G2 (Orthometric). Two separators were inserted in the mesial and distal sides of the lower right first molar. Participants were instructed to rate the level of pain at T0 (before insertion), T1 (just after insertion), and T2 (24 hours after insertion) on a visual analog scale. The gingival crevicular fluid was collected at T0 and T2. The levels of anxiety, catastrophizing, tooth sensitivity, and cytokine expression were also assessed. Statistical analysis was performed with the Fisher-Freeman-Halton, chi-squared, Spearman's correlation, and dependent and independent t tests (α=5%). Pain intensity was higher at T2 than at T1, in both groups (P<.05). An association was established (P<.05) between pain intensity at T1 and catastrophizing, and at T2 with anxiety and catastrophizing. Within-group differences in cytokine expression were found between T0 and T2. There was no correlation between cytokine expression and pain levels, anxiety, catastrophizing, and sensitivity at T2. Tooth separation produced variable pain levels, which were influenced by anxiety and catastrophizing, however, pain level was not correlated with increased cytokine expression.

Ortodontia infantil: manejo de espaço na dentadura mista com alinhadores / Orthodontic treatment for children: space management in mixed dentition with aligners

Resumo Durante a dentadura mista pode-se observar uma série de distúrbios do desenvolvimento que devem ser tratados a fim de devolver ao paciente uma oclusão normal ou minimizar o tratamento corretivo futuro. A perda precoce de dentes decíduos pode ocasionar alterações significativas na oclusão como a perda de perímetro do arco, o que prejudica a irrupção fisiológica dos dentes permanentes. O objetivo deste trabalho é apresentar o manejo de espaços durante a dentadura mista por meio de alinhadores ortodônticos, no qual foi diagnosticada a perda prematura de um dente decíduo no período intertransitório da dentadura mista. O tratamento, realizado com alinhadores ortodônticos, foi planejado para: verticalização do primeiro molar permanente, recuperação do espaço reduzido devido à perda do segundo molar decíduo, expansão sequencial dos arcos superior e inferior, correção da mordida profunda e alinhamento e nivelamento dos incisivos superiores e inferiores. Para obtenção dos resultados propostos, foram utilizadas 3 sequências de alinhadores. Os resultados demonstram que os alinhadores ortodônticos representam uma alternativa viável para a intervenção oportuna em pacientes com perda prematura de dentes decíduos e redução de espaço para dentes permanentes. Ainda, permitem a correção simultânea de outras alterações oclusais, o que confere eficiência ao tratamento interceptor (AU)

Abstract During the mixed dentition, a series of developmental disorders can be observed that must be treated to return the patient to a normal occlusion or to minimize future comprehensive treatment. Early loss of deciduous teeth can cause significant changes in occlusion, such as loss of arch perimeter, which impairs the physiological eruption of permanent teeth. This clinical report aims at presenting the management of spaces during the mixed dentition by means of orthodontic aligners, in which the premature loss of a deciduous tooth was diagnosed in the inter-transitional phase of the mixed dentition. The treatment, carried out with orthodontic aligners, was planned for: verticalization of the first permanent molar, recovery of the reduced space due to the loss of the second deciduous molar, sequential expansion of the upper and lower arches, correction of the deep bite and alignment and leveling of the upper and lower incisors. To obtain the proposed results, 3 sequences of aligners were used. The results demonstrated that orthodontic aligners represent an alternative for early intervention in patients with premature loss of deciduous teeth and reduced space for permanent teeth. Furthermore, they allow the simultaneous correction of other occlusal alterations, which makes the early treatment efficient. (AU)

Is There Still Time to Orthodontics in Elderly Patients? / Ainda há Tempo para a Ortodontia na Melhor Idade?

Life expectancy rate has increased in the past decades and a crescent number of elderly patients are searching for dental treatment aiming for aesthetic and functional rehabilitation. Geriatric Dentistry is a dental specialty which focuses on the elderly population dental care, specially aiming at preventive and healing care of patients with diseases or systemic and chronic conditions, associated to physiological, physical or psychological deficiencies. Other specialties in Dentistry, such as Orthodontics, have become important allies in this new challenge of the Dental profession. This study aimed at analyzing characteristics involved in orthodontic treatment when associated with gerontologic needs, considering relevant factors to an adequate application based on a case report. The treatment was planned integrating Periodontics, Orthodontics, Prosthodontics and Operative Dentistry practice, allowing the reestablishment of function and aesthetics harmonically. Orthodontic treatment represents a feasible procedure in Geriatric Dentistry, as long as applying light forces and respecting both the characteristics and limitations of these areas of treatment.(AU)

Com o aumento considerável da expectativa de vida da população, um crescente número de pacientes idosos tem procurado tratamento odontológico para reabilitação estética e/ou funcional. A Odontogeriatria, é a especialidade odontológica que enfatiza o cuidado bucal da população idosa, especificamente do atendimento preventivo e curativo de pacientes com doenças ou condições de caráter sistêmico e crônico, associadas a problemas fisiológicos, físicos ou psicológicos. Diversas especialidades odontológicas, dentre elas a Ortodontia, vêm se integrando com esta área odontológica. Este trabalho objetiva abordar as características do tratamento ortodôntico associado a uma atuação odontogeriátrica, considerando os fatores relevantes para a execução do tratamento ortodôntico nesses pacientes a partir do relato de um caso clínico. Planejou-se este caso de forma integrada, envolvendo Periodontia, Ortodontia, Prótese e Dentística Restauradora, que foram capazes de devolver à paciente função e estética. O tratamento ortodôntico representa uma intervenção viável na atuação odontogeriátrica, desde que realizado com forças suaves, considerando as limitações e respeitando as características inerentes a esta atuação. (AU)

Differential Maxillary Expander as an Alternative Device for Early Treatment of Posterior Crossbite: Case Report / Expansor Maxilar Diferencial como Dispositivo Alternativo Para o Tratamento Precoce da Mordida Cruzada Posterior: Relato de Caso

Rapid maxillary expansion (RME) is the protocol of choice for early treatment of transverse malocclusions and it is achieved with fixed expanders that produce heavy forces to achieve midpalatal suture opening. One third of patients with maxillary constriction have a greater transversal deficiency at the intercanine width than at the intermolar. The aim of this article is to present a protocol for early treatment of posterior crossbite with the use of the expander with differential opening (EDO) for RME. It is a new appliance to perform RME and its main advantage would be to allow the expansion individualization. EDO was proposed aiming to promote greater expansion on the anterior rather than on the posterior region. A 9 year-old female sought treatment. The interceptive treatment plan was based on using EDO for RME. The post-expansion orthopedic response showed an opening of 7.5 mm between the maxillary central incisors, at the level of the incisal edge. It was observed an opening of 4.8mm in the midpalatal suture. The opening at a distance of 10 mm and 20 mm from the crest to posterior at the midpalatal suture were 3.9mm and 2.8mm. The upper intercanine distance showed an increase of 9.31 mm. The upper intermolar distance had increased 8.04 mm. The upper arch perimeter showed a difference from 74.02 mm to 80.11 mm . And the upper arch length, from 29.83 mm to 31.56 mm. The posterior crossbite was 2 mm overcorrected. Early diagnosis and treatment of posterior crossbite has a very favorable prognosis. (AU)

A expansão rápida da maxila (ERM) é a técnica de escolha para o tratamento precoce das más oclusões transversais e é ativada com expansores fixos que produzem forças pesadas para possibilitar a abertura da sutura palatina mediana. Um terço dos pacientes com atresia maxilar apresenta uma maior deficiência transversal na região intercaninos do que na região intermolares. O objetivo desse artigo é apresentar um protocolo de tratamento precoce para a mordida cruzada posterior utilizando o expansor maxilar Diferencial (EMD) para realizar a ERM. EMD é um novo dispositivo que pode ser empregado para realização da ERM e sua principal vantagem seria permitir a individualização da expansão. EMD foi proposto para proporcionar maior expansão na região anterior do que na região posterior da maxila. Uma menina de 9 anos de idade buscou tratamento. O plano de tratamento interceptativo proposto foi ERM utilizando o dispositivo EMD. A resposta ortopédica pós expansão mostrou uma abertura de 7,5 mm entre os incisivos centrais superiores, ao nível da borda incisal. Foi observada uma abertura de 4,8 mm na sutura palatina mediana. A abertura a uma distância de 10 mm e 20 mm da crista para posterior na sutura palatina mediana foi de 3,9 mm e 2,8 mm. A distância intercaninos superior apresentou aumento de 9,31 mm. A distância intermolares superiores aumentou 8,04 mm. O perímetro do arco superior apresentou diferença de 74,02 mm para 80,11 mm. E o comprimento do arco superior, de 29,83 mm para 31,56 mm. A mordida cruzada posterior foi sobrecorrigida em 2 mm. O diagnóstico precoce e o tratamento da mordida cruzada posterior tem um prognóstico muito favorável. (AU)

Immediate skeletal effects of rapid maxillary expansion at midpalatal suture opening with Differential, Hyrax and Haas expanders

ABSTRACT Objective: The aim of this study was to test the null hypothesis that there is no difference at the midpalatal suture opening after rapid maxillary expansion (RME) using Expander with Differential Opening (EDO), Hyrax-type and Haas-type expanders. Methods: Occlusal radiographs of 52 patients (19 males and 33 females; average age= 9.46?1.20 years) treated with RME were divided into three groups, according to the expander used: EDO (n=17), Hyrax-type (n=21) and Haas-type (n=14). The evaluated variables were: A) Distance between the maxillary central incisors at the incisal edge; B) Distance between the alveolar ridges at the midpalatal suture; C) Suture opening at 10-mm distance from the crest to posterior, at the midpalatal suture; D) Suture opening at 20-mm distance from the crest to posterior, at the midpalatal suture; and E) Suture opening at 30-mm distance from the crest to posterior, at the midpalatal suture. To assess the normality of variables, the Shapiro-Wilk test was performed. For intergroup comparison, ANOVA with a significance level of 5% was used. Results: At the region A, Hyrax-type (4.66 mm) and EDO (4.87 mm) groups presented larger openings than the Haas-type group (3.43 mm). In regions B and C, EDO showed a statistically significant greater opening than the Haas-type group. In region D, a smaller opening of the midpalatal suture was observed in the Haas-type group, compared to the Hyrax-type and EDO groups. Conclusions: EDO and Hyrax-type produced greater immediate skeletal effects, compared with Haas-type, but these differences were about 1 mm and might not be clinically significant.

RESUMO Objetivo: O objetivo do presente estudo foi testar a hipótese nula de que não existe diferença na abertura da sutura palatina mediana após a expansão rápida da maxila (ERM) usando os expansores Diferencial, tipo Hyrax e tipo Haas. Métodos: Radiografias oclusais de 52 pacientes (19 do sexo masculino e 33 do sexo feminino; idade média: 9,46 ? 1,20 anos) tratados com ERM foram divididas em três grupos, de acordo com o tipo de expansor usado: Diferencial (n = 17), tipo Hyrax (n = 21) e tipo Haas (n = 14). As variáveis avaliadas foram: A) distância entre os incisivos centrais superiores na borda incisal; B) distância entre os rebordos alveolares na sutura palatina mediana; C) abertura da sutura a 10 mm de distância da crista para posterior, na sutura palatina mediana; D) abertura da sutura a 20 mm da crista para posterior, na sutura palatina mediana; e E) abertura da sutura a 30 mm da crista para posterior, na sutura palatina mediana. Para verificar a normalidade das variáveis, utilizou-se o teste de Shapiro-Wilk. Para comparação intergrupos, usou-se a ANOVA com nível de significância de 5%. Resultados: Na região A, os grupos tipo Hyrax (4,66 mm) e Diferencial (4,87 mm) apresentaram uma abertura maior do que o grupo tipo Haas (3,43 mm). Nas regiões B e C, o Diferencial mostrou abertura significativamente maior do que o grupo tipo Haas. Na região D, uma abertura menor da sutura palatina mediana foi observada no grupo tipo Haas, comparado aos grupos tipo Hyrax e Diferencial. Conclusões: Os expansores Diferencial e tipo Hyrax produziram maiores efeitos esqueléticos imediatos, comparados ao tipo Haas, mas essas diferenças foram de aproximadamente 1 mm e podem não ser clinicamente significativas.

Previsibilidade da expansão dentoalveolar em pacientes em dentadura mista com Invisalign First® / Dentoalveolar expansion predctability in mixed dentition patients with Invisalign First®

Resumo O objetivo da pesquisa foi avaliar a previsibilidade da expansão dentoalveolar do pacote Invisalign em pacientes com dentadura mista. Foram selecionados de maneira consecutiva 15 pacientes (9 meninos e 6 meninas) com média de idade de 7 anos e 10 meses com indicação de tratamento ortodôntico e necessidade de aumento transversal dentoalveolar do arco superior. Todos os pacientes foram tratados seguindo o mesmo protocolo de expansão, trocando os alinhadores a cada 7 dias. O tratamento seguiu até que o resultado desejado fosse alcançado. Os modelos digitais iniciais e finais foram exportados para o software Orthocad® (Align Technology, California, Estados Unidos da América) no qual as distâncias lineares inter primeiros molares permanentes, inter segundos molares decíduos, , inter primeiros molares decíduos e intercaninos foram medidas. A quantidade de expansão dentoalveolar planejada foi obtida no software ClinCheck, no qual o tratamento realizado para confecção dos alinhadores é elaborado e aprovado. O teste de normalidade Shapiro-Wilk foi realizado e o teste-t pareado e o teste de Wilcoxon foram utilizados para comparações pareadas. O nível de significância 5% (p>0,05) foi adotado para todos os testes. A maior quantidade de expansão foi observada na região dos primeiros molares decíduos (4,5mm), seguida pelos segundos molares decíduos (3,8mm), primeiros molares permanentes (3,4mm) e caninos decíduos (3,3mm). A maior previsibilidade ocorreu, respectivamente na região dos primeiros molares decíduos (99,5%), primeiros molares permanentes (98,9%), segundos molares decíduos (98.0%) e caninos decíduos (95,5%). Dessa forma se concluiu que o sistema Invisalign First é uma opção eficiente para expansão dentoalveolar em dentadura mista (AU)

Abstract The aim of the present research was to evaluate the predictability of dentoalveolar expansion with Invisalign package in patients with mixed dentition. Fifteen patients were consecutively selected (9 boys and 6 girls) with a mean age of 7 years and 10 months with indication for orthodontic treatment and need of upper arch transverse dentoalveolar expansion. All patients were treated following the same expansion protocol, changing aligners every 7 days. Treatment continued until the aimed result was achieved. The initial and final digital models were exported to Orthocad® software (Align Technology, California, United States of America) in which the linear intercanine distances, inter first deciduous molars, inter second deciduous molars and inter first permanent molars were measured. The amount of planned dentoalveolar expansion was obtained using the ClinCheck software, in which treatment for aligners manufacturing is elaborated and approved. The Shapiro-Wilk normality test was performed, and the paired t-test and the Wilcoxon test were used for paired comparisons. The significance level of 5% (p>0.05) was adopted for all tests. The greatest amount of expansion was observed in the region of the first deciduous molars (4.5mm), followed by the second deciduous molars (3.8mm), the first permanent molars (3.4mm) and deciduous canines (3.3mm). The greatest predictability occurred, respectively, in the region of the first deciduous molars (99.5%), the first permanent molars (98.9%), second deciduous molars (98.0%) and deciduous canines (95.5%). Thus, it was concluded that the Invisalign First system is an efficient option for dentoalveolar expansion in mixed dentition.(AU)

Como controlar a abertura da mordida posterior durante o tratamento com alinhadores? / How to control posterior openbite during treatment with aligners?

Resumo Dentre as dificuldades observadas durante o tratamento com os alinhadores ortodônticos, destaca-se a abertura da mordida posterior. Esta intercorrência pode ser causada pela intrusão não programada de dentes posteriores superiores e/ou inferiores, principalmente molares, e ocorre de forma mais frequente em pacientes braquifaciais. O objetivo deste trabalho foi apresentar um caso clínico tratado com alinhadores ortodônticos em que se observou a intrusão não planejada de molares, com necessidade de correção em fase de tratamento ativo. Como recursos para fechamento da mordida posterior, utilizaram-se levantes de mordida nos incisivos superiores, correção do torque dos molares superiores e inserção de attachments de extrusão nos dentes posteriores. Houve correção completa após 2 sequências de refinamento com alinhadores adicionais. Recomenda-se atenção aos pacientes braquifaciais e à expansão dentária com inclinação vestibular excessiva dos dentes posteriores. A inserção de levantes de mordida e controle de torque nos dentes posteriores podem minimizar os efeitos negativos da técnica (AU)

Abstract Among the difficulties observed during treatment with orthodontic aligners, the opening of the posterior bite stands out. This complication can be caused by unplanned intrusion of upper and/or lower posterior teeth, mainly molars, and occurs more frequently in horizontal patients. The objective of this study was to present a clinical case treated with orthodontic aligners in which unplanned intrusion of molars was observed, in need of correction in the active treatment phase. As resources for closing the posterior bite, bite lifts were used on the upper incisors, torque correction on the upper molars, and insertion of extrusion attachments on the posterior teeth. There was complete correction after 2 refinement sequences with additional aligners. Attention is recommended for horizontal patients and dental expansion with excessive buccal tipping of the posterior teeth. The insertion of anterior build-ups and torque control on the posterior teeth can minimize the negative effects of the technique. (AU)

Preferência pelo design dos aparelhos ortodônticos entre jovens universitários de diferentes cursos / Orthodontic appliances desing preference among university students from different courses

O objetivo da pesquisa foi avaliar a preferência de jovens universitários de cursos das áreas da Saúde, Exatas e Humanas por diferentes modelos de aparelho ortodôntico. Foram selecionados dois (modelos) indivíduos jovens, um masculino e um feminino. Em seguida, foram confeccionadas 6 imagens simulando aparelhos ortodônticos para cada modelo. Após confeccionar um álbum de fotografias com todas as imagens, os álbuns foram entregues aos estudantes universitários (n=169) com idades entre 18 a 25 anos, juntamente com um questionário. Foram então formados 3 grupos de avaliadores das áreas do conhecimento, Saúde (n=62), Exatas (n=51) e Humanas (n=56). No questionário, os avaliadores identificaram o aparelho de sua preferência, caso fossem ser tratados, apontando nas 6 imagens a ordem de sua preferência. Eles ainda responderam o motivo da escolha daquele modelo de aparelho. Os alinhadores obtiveram maiores avaliações sobre os aparelhos estéticos (5,0). Em contrapartida, os aparelhos metálicos foram os piores avaliados (2,0). Não houve influência da área de estudo e do gênero do avaliador sobre a hierarquia de atratividade na avaliação, no entanto as avaliadoras do sexo feminino da área de Saúde foram mais críticas quanto ao aparelho metálico com ligadura azul. Apesar da área de estudo não ter influenciado na preferência pelo tipo de aparelho, sendo os mais estéticos preferidos sobre os metálicos, as avaliações mais críticas partiram dos estudantes da área de Saúde. (AU)

The aim of the present research was to evaluate the preference of young university students from courses of the health, science, and human areas regarding different orthodontic appliance design. Two (models) young individuals were selected, one male and one female. Then 6 images were made simulating orthodontic appliances for each model. After producing a photo album with all the images, the albums have been given to university students (n=169) aged between 18 and 25 years old, along with a questionnaire. Three groups of evaluators from different areas of knowledge: Health (n=62), Science (n=51) an Human area (n=56) were formed. In the questionnaire, the evaluators identified which device they would prefer if they were treated, indicating the order of their preference on the 6 images. They also answered the reason for choosing that device model. Aligners had higher ratings than aesthetic devices (5.0). On the other hand, metallic appliances were the worst evaluated (2.0). There was no influence of the study area and the evaluator's gender on the hierarchy of attractiveness in the evaluation, however female evaluators from the Health area were more critical regarding metallic braces with blue ligature. Although the study area did not influence the preference for the type of appliance, with the most aesthetic being preferred over metallic ones, the most critical evaluations came from students in the Health area (AU)

Differential Diagnosis of Skeletal Class II: Orthodontic-Surgical Approach with Surgery First / Diagnóstico Diferencial da Classe II esquelética: Abordagem Ortodôntico-Cirúrgica com Benefício Antecipado

Abstract Orthodontic-surgical treatment with the "Surgery First Approach" provides immediate facial aesthetic improvements and significantly reduces the patient's orthodontic treatment time, avoiding the transient worsening of the facial profile due to dental decompensation that occurs in surgical cases. Thus, this clinical case describes the retreatment of a 22-year-old female leukoderma patient, whose main complaint was related to the proclination of upper and lower incisors. The patient used a mio-relaxing plate for 30 days, which evidenced the skeletal mandibular deficiency and the ½ bilateral Class II malocclusion. Orthognathic surgery first approach associated with the extraction of the 4 premolars was chosen considering the patient's aesthetic demand. The use of a mio-relaxing plate in the diagnostic stage was essential for the real diagnosis of mandibular deficiency and the technique employed made it possible to conclude the treatment avoiding aesthetic commitment, with excellent results. (AU)

Resumo O tratamento ortodôntico-cirúrgico por meio do benefício antecipado proporciona melhorias estéticas faciais imediatas e reduz de maneira significativa o tempo de tratamento ortodôntico do paciente, evitando a piora transitória do perfil facial devido à descompensação dentária que ocorre em casos cirúrgicos. Assim, este caso clínico descreve o retratamento de uma paciente com 22 anos de idade, leucoderma, sexo feminino, que apresentava queixa principal relacionada à inclinação vestibular dos dentes anteriores. Após uso de placa miorrelaxante por 30 dias, verificou-se a presença de Classe II esquelética com deficiência mandibular e ½ Classe II dentária bilateral. Considerando a demanda estética da paciente, optou-se pela abordagem ortodôntico-cirúrgica com Benefício Antecipado associada à extração de 4 pré-molares para correção da inclinação dentária anterior. O uso da placa miorrelaxante foi fundamental para o diagnóstico real da deficiência mandibular e a técnica empregada possibilitou concluir o tratamento evitando o comprometimento estético pré-cirúrgico, com obtenção de excelentes resultados. (AU)

3-D Evaluation of temporary skeletal anchorage sites in the maxilla.

BACKGROUND: The selection of temporary anchorage device (TAD) site can be a challenging task since one should not only consider the 2-D distances between roots, but also the entire 3-D space. Thus, the aim of this study was to evaluate the posterior maxillary region areas available for the insertion of temporary anchorage devices in reconstructed images from cone beam computed tomography (CBCT). MATERIAL AND METHODS: Sample consisted of 72 patients with indication for orthodontic treatment, grouped into three distinct age groups: 11 to 14 years (age group 1), 15 to 19 years (age group 2) and aged 20 years or older (age group 3), which were further subdivided as to the type of malocclusion (Angle Class I, II and III). Orthopantomographic reconstructions and cross sections were obtained with the Dolphin Imaging software. The distance between the roots of maxillary teeth (canines, premolars and first molars) was determined at 5 mm of the cementoenamel junction, as well as the depth of bone availability at different insertion angles (90°, 75°, 60°, 45°). The influence of different angulations, age, and malocclusion on bone availability was evaluated by ANOVA, followed by the Bonferroni post-test. For the evaluation of the interaction of these factors, 2-way ANOVA was used. RESULTS: Bone availability was found to be poor between roots in the molar region. There was a reduction in bone availability with increasing age. With regard to angulations, greater bone availability was found in depth for 45° angulation in the canine and first premolar regions and for angulation of 75° or 90° in the molar region. However, there was no difference between bone availability in the region of the second premolars. CONCLUSIONS: According to applied methodology it can be concluded that the region between canines and premolars accepts better vertical angular variations for TADs insertion. Key words:Cone-Beam Computed Tomography, Orthodontic Anchorage Procedures.

Stability of early anterior open bite treatment: a 2-year follow-up randomized clinical trial.

This 2-year-follow up study compared and evaluated the stability of early anterior open bite (AOB) treatment based on different appliances. Children from 7 to 10 years with Angle Class I, AOB larger than 1.0 mm and fully erupted maxillary and mandibular permanent central incisors were eligible. The initial sample was 99 patients distributed, by simple randomization, into four groups: BS (bonded spurs), CC (chincup), FPC (fixed palatal crib) and RPC (removable palatal crib). Cephalometric analysis was performed at baseline (T1), final (T2) and 2-year post-treatment (T3) by taking the overbite measurements as the main outcome. Blinding was possible to cephalometric analysis. At T3, with dropouts, there were 63 individuals, being BS (n=15; overbite 0.19 mm; 11.54 years; 10 female (F)/5 male (M)); CC (n=11; overbite -0.19 mm; 11.41 years; 8 F/3 M); FPC (n=21; overbite 1.23 mm; 11.44 years; 15 F/6 M) and; RPC (n=16; overbite 0.73 mm; 11.67 years; 6 F/10 M). Changes in dentoskeletal variables and breaking deleterious oral habits during the follow up were statically analyzed with p<.05. Mandibular skeletal linear measurements and vertical dental components have gradually increased with age, manly at pubertal growth spurt and at the establishment of permanent dentition after treatment. Incisor teeth extrusion had impact on AOB correction and stability in 4 groups, which recorded a 1.15 mm-improvement of overbite after treatment (T3-T2). The experimental appliances were effective with stable results, being FPC the device recorded the highest AOB correction and the lowest patient withdrawal rate.

Likert scale vs visual analog scale for assessing facial pleasantness.

INTRODUCTION: This study aimed to compare the 2 most commonly used methods for assessing facial pleasantness, the Likert scale and the visual analog scale (VAS). METHODS: For assessing facial pleasantness, an album was assembled containing the front and profile view facial photographs of 10 patients (5 females, 5 males) who sought orthodontic treatment representing each of the different sagittal and vertical facial discrepancies (straight profile, convex profile, concave profile, long faces, and short faces). The facial pleasantness of the patients was judged by 3 groups of 90 evaluators (47 females and 43 males): 30 orthodontists (mean age, 32.41 years), 30 oral maxillofacial surgeons (mean age, 36.83 years), and 30 laypeople (mean age, 36.83 years). The evaluators judged the facial pleasantness using VAS and a 5-point Likert scale. At the end of the evaluation, the evaluators completed a questionnaire about their preferred scale. Analysis of variance and Tukey and Kruskal-Wallis tests were used to compare the data from VAS and Likert scale, respectively. The Spearman correlation coefficient was used to estimate the correlation between the 2 scales. Fisher transformation and z-statistic were used to estimate the correlation among the evaluator groups. In all tests, a 5% statistical significance level was adopted. RESULTS: Both scales presented similar answers; only VAS values for the scores of pleasant and very pleasant according to the Likert scale could not be distinct. Most evaluators preferred the Likert scale as they found it easier to convey their opinion than VAS. CONCLUSIONS: Although both scales can be used to assess facial pleasantness, the Likert scale seems more appropriate as the evaluators preferred it because of its simplicity.

External apical root resorption 6 months after initiation of orthodontic treatment: A randomized clinical trial comparing fixed appliances and orthodontic aligners.

OBJECTIVE: To compare the magnitude of external apical root resorption (EARR) 6 months after starting orthodontic treatment using orthodontic aligners (OAs) and fixed appliances (FAs). METHODS: This parallel randomized clinical trial included 40 patients randomized into two groups: OA group (n = 20, 160 incisors) and FA group (n = 20, 160 incisors). For evaluation of the tooth length, periapical radiographs and standardized linear measurements of the maxillary and mandibular incisors were acquired before (T0) and 6 months after treatment initiation (T1). EARR was calculated through the difference in length between the two time points (T1-T0). Statistical comparisons were performed by means of using t-tests, chi-squared test and covariance analysis (a = 5%). RESULTS: Rounding of the root apex was observed in both groups; the resorption involved 2.88% of the root length, so 97.12% of the tooth length remained intact. Intragroup comparisons between the two time points revealed a significant difference, with (T1-T0) ranging from -0.52 to -0.88 mm in the FA group and from -0.52 to -0.85 mm in the OA group. In the intergroup comparisons, only tooth #21 presented a statistically significant difference (OA: -0.52 ± 0.57 mm, FA: -0.86 ± 0.60 mm); however, the overall differences between groups were not clinically relevant, ranging from 0.03 to 0.35 mm. CONCLUSIONS: OA and FA treatment resulted in a similar degree of EARR in the maxillary and mandibular incisors at 6 months after treatment initiation. However, the amount of resorption was small and does not impair tooth longevity.

Interdisciplinary Orthodontic Treatment to Reestablishment Smile Function and Aesthetics / Tratamento Ortodôntico Interdisciplinar Para o Reestabelecimento da Função e Estética do Sorriso

Extrusive tooth movements are an important resource in orthodontic treatment and allow the manipulation of teeth and periodontal tissues. They can be performed quickly or slowly, depending on the patient's need. Rapid extrusion is indicated for cases in need of prosthetic preparation or restoration, where the bone and gingival tissues are intact, such as horizontal and oblique fractures, coronary or external root resorption, iatrogenic perforations (trepanations) and the presence of subgingival caries. The aim of this study is to describe the treatment of a patient who had a coronary fracture of the right upper central incisor, with a limit located 1 mm above the level of the bone crest. Rapid orthodontic extrusion was performed, to restore biologic distances and allow the preparation for prosthesis. It started with partial differentiated bonding of a fixed orthodontic appliance to the upper arch, to allow for a 3mm orthodontic extrusion. At the end of the extrusion, periodontal surgery was performed to increase the clinical crown and endodontic treatment. After these procedures, the case was concluded with the fixed prosthesis installation. The realization of an integrated planning allowed the restoration of aesthetics, with preservation of the functional periodontal limits for the patient.(Au)

Os movimentos dentários extrusivos constituem um recurso importante no tratamento ortodôntico e permitem a manipulação dos dentes e dos tecidos periodontais. Eles podem ser realizados de forma rápida ou lenta, dependendo da necessidade do paciente. A extrusão rápida está indicada para casos com necessidade de preparo protético ou restauração, onde os tecidos ósseo e gengival encontram-se íntegros, tais como fraturas horizontais e oblíquas, reabsorções coronárias ou radiculares externas, perfurações iatrogências (trepanações) e presença de cárie subgengival. O objetivo deste trabalho é descrever o tratamento de uma paciente que apresentava fratura coronária do incisivo central superior direito, com limite localizado 1mm acima do nível da crista óssea. Realizou se extrusão ortodôntica rápida, com a finalidade de restabelecer as distâncias biológicas e permitir o preparo para prótese. Iniciou-se com colagem diferenciada parcial de aparelho ortodôntico fixo no arco superior, para permitir a extrusão ortodôntica de 3mm. Ao término da extrusão, realizou-se cirurgia periodontal para aumento da coroa clínica e tratamento endodôntico. Após esses procedimentos, o caso foi finalizado com a instalação da prótese fixa. A realização de um planejamento integrado permitiu o restabelecimento da estética, com preservação dos limites periodontais funcionais para a paciente. (Au)